117 proc logistic data=mysam.mysam2001 simple; 118 class frsex hourspwg hnearnra famtypa miginda frnssec8; 119 model rev_own=frsex hourspwg hnearnra famtypa miginda frnssec8 / expb rsquare; 120 title "London Home Ownership Models for Greater London Region"; 121 run; NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: There were 143773 observations read from the data set MYSAM.MYSAM2001. NOTE: PROCEDURE LOGISTIC used (Total process time): real time 3.14 seconds cpu time 2.01 seconds 122 proc logistic data=mysam.mysam2001 outest=mysam.ownmods noprint; 123 class frsex hourspwg hnearnra famtypa miginda frnssec8; 124 model rev_own=frsex hourspwg hnearnra famtypa miginda frnssec8 / expb rsquare; 125 title "London Home Ownership Models by LA"; 126 by lacode; 127 run; NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BK Westminster&City NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AB Barking and Dagenham NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AC Barnet NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AD Bexley NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AE Brent NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AF Bromley NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AG Camden NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AH Croydon NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AJ Ealing NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AK Enfield NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AL Greenwich NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AM Hackney NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AN Hammersmith and Fulham NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AP Haringey NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AQ Harrow NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AR Havering NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AS Hillingdon NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AT Hounslow NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AU Islington NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AW Kensington and Chelsea NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AX Kingston upon Thames NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AY Lambeth NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AZ Lewisham NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BA Merton NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BB Newham NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BC Redbridge NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BD Richmond upon Thames NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BE Southwark NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BF Sutton NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BG Tower Hamlets NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BH Waltham Forest NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BJ Wandsworth NOTE: There were 143773 observations read from the data set MYSAM.MYSAM2001. NOTE: The data set MYSAM.OWNMODS has 32 observations and 28 variables. NOTE: PROCEDURE LOGISTIC used (Total process time): real time 5.96 seconds cpu time 3.21 seconds 128 ***Ownership Models for those who just moved in within the last year; 129 proc logistic data=mysam.mysam2001 simple; 130 where miginda ne 0; 131 class frsex hourspwg hnearnra famtypa frnssec8; 132 model rev_own=frsex hourspwg hnearnra famtypa frnssec8 / expb rsquare; 133 title "Ownership Model for Recent Movers for Greater London Region"; 134 run; NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: There were 18942 observations read from the data set MYSAM.MYSAM2001. WHERE miginda not = 0; NOTE: PROCEDURE LOGISTIC used (Total process time): real time 0.45 seconds cpu time 0.43 seconds 135 proc logistic data=mysam.mysam2001 outest=mysam.ownmov noprint; 136 where miginda ne 0; 137 class frsex hourspwg hnearnra famtypa frnssec8; 138 model rev_own=frsex hourspwg hnearnra famtypa frnssec8 / expb rsquare; 139 title "Ownership Model for Recent Movers by LA"; 140 by lacode; 141 run; NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. WARNING: There is possibly a quasi-complete separation of data points. The maximum likelihood estimate may not exist. WARNING: The LOGISTIC procedure continues in spite of the above warning. Results shown are based on the last maximum likelihood iteration. Validity of the model fit is questionable. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BK Westminster&City NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AB Barking and Dagenham NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AC Barnet NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AD Bexley NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AE Brent NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AF Bromley NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AG Camden NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AH Croydon NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AJ Ealing NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AK Enfield NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AL Greenwich NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AM Hackney NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AN Hammersmith and Fulham NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AP Haringey NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AQ Harrow NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AR Havering NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AS Hillingdon NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AT Hounslow NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AU Islington NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AW Kensington and Chelsea NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AX Kingston upon Thames NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AY Lambeth NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AZ Lewisham NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BA Merton NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BB Newham NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BC Redbridge NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BD Richmond upon Thames NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BE Southwark NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BF Sutton NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BG Tower Hamlets NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BH Waltham Forest NOTE: PROC LOGISTIC is modeling the probability that rev_own=0. One way to change this to model the probability that rev_own=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BJ Wandsworth NOTE: There were 18942 observations read from the data set MYSAM.MYSAM2001. WHERE miginda not = 0; NOTE: The data set MYSAM.OWNMOV has 32 observations and 24 variables. NOTE: PROCEDURE LOGISTIC used (Total process time): real time 0.64 seconds cpu time 0.61 seconds 142 143 ***Models predicting who moved into their homes in the last year; 144 proc logistic data=mysam.mysam2001 simple; 145 class frsex hourspwg hnearnra famtypa frnssec8; 146 model rev_mov=frsex hourspwg hnearnra famtypa rev_own frnssec8 / expb rsquare; 147 title "Mobility Model for Greater London Region"; 148 run; NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: There were 143773 observations read from the data set MYSAM.MYSAM2001. NOTE: PROCEDURE LOGISTIC used (Total process time): real time 2.25 seconds cpu time 1.76 seconds 149 proc logistic data=mysam.mysam2001 outest=mysam.movmods noprint; 150 class frsex hourspwg hnearnra famtypa frnssec8; 151 model rev_mov=frsex hourspwg hnearnra famtypa rev_own frnssec8 / expb rsquare; 152 title "Mobility Model by LA"; 153 by lacode; 154 run; NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BK Westminster&City NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AB Barking and Dagenham NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AC Barnet NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AD Bexley NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AE Brent NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AF Bromley NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AG Camden NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AH Croydon NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AJ Ealing NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AK Enfield NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AL Greenwich NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AM Hackney NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AN Hammersmith and Fulham NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AP Haringey NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AQ Harrow NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AR Havering NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AS Hillingdon NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AT Hounslow NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AU Islington NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AW Kensington and Chelsea NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AX Kingston upon Thames NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AY Lambeth NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00AZ Lewisham NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BA Merton NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BB Newham NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BC Redbridge NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BD Richmond upon Thames NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BE Southwark NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BF Sutton NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BG Tower Hamlets NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BH Waltham Forest NOTE: PROC LOGISTIC is modeling the probability that rev_mov=0. One way to change this to model the probability that rev_mov=1 is to specify the response variable option EVENT='1'. NOTE: Convergence criterion (GCONV=1E-8) satisfied. NOTE: The above message was for the following by-group: local authority (GB) or parliamentary constituency (NI)=00BJ Wandsworth NOTE: There were 143773 observations read from the data set MYSAM.MYSAM2001. NOTE: The data set MYSAM.MOVMODS has 32 observations and 25 variables. NOTE: PROCEDURE LOGISTIC used (Total process time): real time 4.68 seconds cpu time 2.67 seconds